[33036489677] Description: The extrusions are anodized after cut, they're clean and beautiful, so you don't need to clean scraps. There are 4 colors to choose. If you want to make other colors, please contact us. Process: surface sandblasting oxidation Package: Only extrusions: 9* 2040 aluminum extrusion 496mm (Wide Beams) 3* 2020 aluminum extrusion 576mm (Aux wide Beams) 1* 2020 aluminum extrusion 460mm (X axis) 4* 2040 aluminum extrusion 560mm (4 corners height beams) 2* 2040 aluminum extrusion 442mm (Z axis) 2* 2020 aluminum extrusion 405mm (bed frame) 2* 2020 aluminum extrusion size: for CR-10 bed: 173mm Full Frame kit 9* 2040 aluminum extrusion 496mm (Wide Beams) 3* 2020 aluminum extrusion 576mm (Aux wide Beams) 1* 2020 aluminum extrusion 460mm (X axis) 4* 2040 aluminum extrusion 560mm (4 corners height beams) 2* 2040 aluminum extrusion 442mm (Z axis) 2* 2020 aluminum extrusion 405mm (bed frame) 2* 2020 aluminum extrusion size: for CR-10 bed: 173mm 2* T Shape Bracket 60x60 14* Corner 90 degrees Angle Bracket for 2020/2040 100* aluminum 2020 Brackets 20x20 \ 20x17 300* M5 T-nut 350* M5*10mm Socket Head Cap Screw 

US $75.90

Grab Now 6%  US $71.35

[4000506488833] CREALITY 3D Printer Part Enclosure For Ender-3/Ender-3 PRO/Ender-5 Printer Advantage: - Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! - Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. - Dustproof and good noise reduction - The interior uses Pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread. - Stable Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space. Item Pictures: 

US $85.99

Limited Time 20%  US $68.79

[33012439773] FAQ Package:2040 V-slot 560mm 2pcs2040 V-slot 600mm 2pcs2040 V-slot 550mm 2pcs2020 V-slot 508mm 3pcs2020 V-slot 523mm 1pcs 

US $96.49

Time Limited offer 5%  US $91.67

[32795804239] Aluminum Heatbed heating bed diameter size:310mm Thickness: 3.5 mm power input: 12v or 24v The line has been successfully welded Thermistor 100 k, is already installed Is ready to heat preservation 

US $60.00

Time Limited offer 0%  US $60.00

[4000068845218] Features: 5 additional TMC2660 stepper motor drivers with stall notification. 5 additional extruder heater outputs. 5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos. 5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs. 6 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN. 4 uncommitted general purpose I/O pins. 12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V. 5 additional thermistor inputs. Support for 2 more thermocouple or PT100daughter boards, supporting up to 4 more sensors. Optional 5V external power input for powering servos, fans etc. Based on the Duex5 by Think3dPrint3d and Esher3d. This reproduction/modification is not endorsed or supported in any way by Think3dPrint3d or Escher3d". Package List: 1pc Duex5 Expansion Board 10pcs jumper 5pcs 4pin plugs 10pcs 3pin plugs 12pcs 2pin plugs 1pc connected cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item inthe picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. 

US $97.30

Limited Offer 27%  US $71.03