Minggu, 19 Agustus 2018

Home / printer 3d / rc / remote control / limited offer US $126.00 3D printer 205*205*245mm size Cross structure Full metal structure high precision Soft patented mag

limited offer US $126.00 3D printer 205205245mm size Cross structure Full metal structure high precision Soft patented mag

by robot Future on Agustus 19, 2018 in printer 3d, rc, remote control

3D printer 205205245mm size Cross structure Full metal structure high precision Soft patented mag

[32848504402] All printer have 12 months warranty,buy it with confidence Printing technology: FDM (fused deposition modeling) Layer size: 0.05-0.3mm Location accuracy: X / Y 0.002mm Z 0.0125mm Printing speed: 20 ~ 200mm / sec. (Recommended speed 60MM/S) Travel speed: mm / sec. 150 The diameter of the nozzle: 0.4mm / 1.75mm Nozzle support: 0.2mm-0.8mm Extruder Quantity: One Print speed: 20 ~ 150mm / sec. Materials for printing: PLA, ABS, HIPS, WOOD-PLA Print size: 205x205x245mm Operating voltage: 24V DC Input Rating: 110-220 VAC, 50/60 H Software: Extruder operating temperature: Max 250 ° C Entrance formats: Stl Obj AMF Cura output formats: Gcode Connection: SD card, USB port (only experienced users) Eectric: Input rating: 110-220 VAC, 50 / 60Hz, 15A 360W Hot bed :200w/24v Heating head power：50w/24v Hot bed temperature: Max 110 ° C The motherboard comes with functions: power off, continuous printing. It needs to be started after printing the first layer, and manually select whether to continue printing after power is restored. 32BIT main control chip Microprocessor STM32 Display MINI12864 TF card upgrade firmware power input 12-24v Motor Driver: Motherboard Integrated 4988 Temperature sensor interface: NTC100K Need to buy additional modules: AClick to buy WIFI module link B Click to buy Material detection About the use of hot bed magnets After printing is complete: Be sure to wait a few minutes for cooling, and it is easy to damage the surface of the magnet after directly removing the model by heating. Installation of the extruder: It can be used from the front to the back. It is recommended to replace the consumables at the front. Printable accessories provide 3D source files. Customers can modify the upgrades themselves. Printing parameters: nozzle 0.8mm printing speed 60mm / s hot bed temperature 55 ° layer height 0.3mm material PLA Firmware update download linkhttps://github.com/my3dltd/F1-MKS-V1.1-Firmware Can modify 3D printing Download Source File https://github.com/my3dltd/3D-PRINTER-F1-B-MKS-V1.1